Notícias da indústria

How to clean solar street lights?

autor : Shenzhen Crown Lighting

tempo de atualização : 2021-06-25 14:43:00

How to clean solar street lights?

Nowadays, energy saving and emission reduction has become a social consensus, and LED solar supply street lights are gradually replacing traditional street lights, not only because solar street lights are more energy-efficient than traditional street lights, but also because they have more advantages in use and can meet the needs of users. So how to clean smart solar LED street light? The following is a detailed introduction for everyone.

1. It is normal for the all-in-one solar powered street lights to be used outdoors after wind, sun, rain and rain. The natural environment of the lamp body causes dust to fall on the lamp body. When the lamp body needs to be cleaned in the dusty place, only need to wet the cloth with water and wring it dry. Just wipe, keep the same direction, do not rub back and forth, the intensity should be moderate, especially the light source module should be gentle, never wash with hard objects or corrosive solvents.

2. Because the solar led street lights battery panel is exposed to the outside for a long time, it will accumulate dust. When the dust accumulates, it will have a certain impact on the solar panel's absorption of sunlight. Once the solar panel surface has a shading surface, a string of cells will be easily formed. Short-circuit, but under normal circumstances, solar led lighting street lights do not need to be cleaned. When it rains, rainwater can effectively wash away the stains or dust on the surface of the lamp body and the battery panel. If it does not rain for a long time, it is recommended to need manual cleaning for about half a year, especially Solar panel surface.

3. If the traffic volume on the road where the street light solar led is located is relatively large, the maintenance personnel should often check the battery pack and solar panel. Due to the high traffic volume on the road, there will be a lot of dust in the air. It will cause a lot of dust to accumulate on the battery panel and the light source module, so it is necessary to clean regularly, otherwise the long-term accumulation of dust will cause the light of the light source module to fail to illuminate the road normally and the solar panel to charge the battery pack, which will affect the lamp normal operation. And it also has a very large impact on the service life of the battery, and it may directly cause damage to the battery pack.

Anterior : Function introduction of integrated solar street light source module

Próximo : The future development trend of solar street lights

Produtos relacionados

Holofotes LED Série ARF, UL/cUL/DLC 5.1 listados/TUV, 50W-500W, 5-10 anos de garantia, 100-480VAC, 140-160lm/W

► Aprovação UL/cUL/FCC/CE/RoHS
► DLC 5.1 Premium
► 0-10V Dimerizável / Sensor de Fotocélula Opcional
► 500W-500W, 140-160 lm/W
► IP65, 5-10 anos de garantia

Holofotes LED Série ARF, UL/cUL/DLC 5.1 listados/TUV, 50W-500W, 5-10 anos de garantia, 100-480VAC, 140-160lm/W

► Aprovação UL/cUL/FCC/CE/RoHS
► DLC 5.1 Premium
► 0-10V Dimerizável / Sensor de Fotocélula Opcional
► 500W-500W, 140-160 lm/W
► IP65, 5-10 anos de garantia

10W-60W SMD LED Down Light 110-150lm/w 5 anos de garantia 2700K-6500K 200-240VAC

► Sem cintilação
► Serviço personalizado disponível
► Uma lâmpada LED, quatro formas de instalação
► Molde exclusivo de CrowndaLED

25W-320W luzes de rua da série S7 (B) aprovadas pela FCC CE

► Alta eficiência: 130lm/W, 150lm/W e 170lm/W disponíveis.
► Lente PC antirreflexo, ângulo de feixe opcional: 60° / 90° / 120° / T2M / T3M / T4M.
► 0-10V regulável/controle de tempo/sensor de luz/controle lOT

Helen Helen Helen

Helen

Deixe um recado

Boletim de Notícias