Notícias da indústria

What causes tunnel lamp condensation and how to solve the problem?

autor : Shenzhen Crown Lighting

tempo de atualização : 2021-06-20 21:00:15

What causes tunnel lamp condensation and how to solve the problem?

Atomization occurs on the inner wall of the tunnel lamp glass. Tunnel lamp condensation is also called condensation or tunnel lamp fogging. It means that water vapor enters the inside of the tunnel light, liquefies the transparent part of the tunnel light or other internal water droplets, which affects the light efficiency and mission life of the tunnel light.

The previous solution was to add water absorption or desiccant inside the tunnel, but as LED tunnel lights gradually become the mainstream in the market, the life of the tunnel lights is getting longer and longer, and the use of desiccant to prevent condensation in the tunnel has a valid period of only 1-2 years . Changzhou Shiming tunnel light adopts a new idea, adding a respirator to the tunnel light. The core material of the respirator is a breathable waterproof membrane. Because the temperature of the tunnel light is generated during operation, even if condensation water is generated inside the tunnel light, the condensation water will soon be The volatilization is eliminated from the respirator, thus solving the problem of tunnel lamp condensation.

At present, the quality of LED luminaire respirators on the market is uneven, and it is very inconvenient to maintain high-configuration LED tunnel lights. Crownda.LED recommends choosing a good-quality respirator. As the lamps accessories, LED luminaire respirator are constantly ventilated to maintain the pressure balance on the inside and outside of the case, while being waterproof and dustproof. It can effectively protect the casing from the negative influence of the pressure difference caused by the temperature change on the casing. In addition, the waterproof and breathable material of the hydrophobic structure can prevent water, dust and insects from penetrating into the inside of the case. Core-preserving microfiltration LED lamp waterproof respirator.

Anterior : 10 mistakes most people make when they upgrade their lighting (1-5).

Próximo : Tunnel light wireless lighting control communication technology zigbee and Z-wave

Produtos relacionados

Holofotes LED Série ARF, UL/cUL/DLC 5.1 listados/TUV, 50W-500W, 5-10 anos de garantia, 100-480VAC, 140-160lm/W

► Aprovação UL/cUL/FCC/CE/RoHS
► DLC 5.1 Premium
► 0-10V Dimerizável / Sensor de Fotocélula Opcional
► 500W-500W, 140-160 lm/W
► IP65, 5-10 anos de garantia

Holofotes LED Série ARF, UL/cUL/DLC 5.1 listados/TUV, 50W-500W, 5-10 anos de garantia, 100-480VAC, 140-160lm/W

► Aprovação UL/cUL/FCC/CE/RoHS
► DLC 5.1 Premium
► 0-10V Dimerizável / Sensor de Fotocélula Opcional
► 500W-500W, 140-160 lm/W
► IP65, 5-10 anos de garantia

10W-60W SMD LED Down Light 110-150lm/w 5 anos de garantia 2700K-6500K 200-240VAC

► Sem cintilação
► Serviço personalizado disponível
► Uma lâmpada LED, quatro formas de instalação
► Molde exclusivo de CrowndaLED

25W-320W luzes de rua da série S7 (B) aprovadas pela FCC CE

► Alta eficiência: 130lm/W, 150lm/W e 170lm/W disponíveis.
► Lente PC antirreflexo, ângulo de feixe opcional: 60° / 90° / 120° / T2M / T3M / T4M.
► 0-10V regulável/controle de tempo/sensor de luz/controle lOT

Helen Helen Helen

Helen

Deixe um recado

Boletim de Notícias